How it's calculated
Concrete is sold by volume. The calculator works out the volume of your shape, adds your extra allowance, then divides by how much concrete one bag makes.
Slab or footing (ft³) = Length (ft) × Width (ft) × Thickness (in) ÷ 12
Column (ft³) = π × (Diameter ÷ 2)² × Height × Count
Steps (ft³) = Width × Rise × Run × n × (n + 1) ÷ 2
Cubic yards = ft³ ÷ 27
To order = Volume × (1 + Extra % ÷ 100)
Bags = To order (ft³) ÷ bag yield, rounded upBag yields used: 80 lb ≈ 0.60 ft³, 60 lb ≈ 0.45 ft³, 50 lb ≈ 0.375 ft³, 40 lb ≈ 0.30 ft³, from manufacturers' data sheets (see Sources). Metric bags use typical yields, so check the yield printed on your bag.
Worked example
Imperial
Patio slab 10 ft × 12 ft, 4 in thick
- Volume
- 10 × 12 × 4 ÷ 12 = 40 ft³
- In yards
- 40 ÷ 27 = 1.48 yd³
- +10%
- 44 ft³ = 1.63 yd³
- 80 lb bags
- 44 ÷ 0.60 → 74
Metric
Patio slab 3 m × 3.6 m, 100 mm thick
- Volume
- 3 × 3.6 × 0.1 = 1.08 m³
- +10%
- 1.188 m³
- To order
- ≈ 1.19 m³
Tips
Don't order the exact volume.
Ground is never perfectly flat and some concrete is always lost. Running out mid-pour is far worse than having a few bags left over.
Measure the real depth. Check the depth of your excavation in several places and use the average; a dip of half an inch across a whole slab adds up fast.
Add up every section. For an L-shaped patio or a footing with several runs, calculate each rectangle separately and add the results.
Plan for the bag count. Mixing dozens of bags by hand is heavy work. For large pours, compare the price of ready-mix delivery.
Questions
How many 80 lb bags make a cubic yard of concrete?
A cubic yard is 27 cubic feet. An 80 lb bag of standard concrete mix makes about 0.60 cubic feet, so one cubic yard takes 27 ÷ 0.60 = 45 bags. Add your waste allowance on top: with 10% extra that is 49.5, so buy 50 bags.
How do I work out concrete for a slab in metric?
Multiply length × width × thickness, all in metres. A 3 m × 3.6 m slab that is 100 mm (0.1 m) thick needs 3 × 3.6 × 0.1 = 1.08 m³. Add 10% extra and order about 1.19 m³. Switch the calculator to Metric to do this automatically.
Should I round up the number of bags?
Yes. You cannot buy part of a bag, and running short in the middle of a pour leaves a weak joint where fresh concrete meets concrete that has started to set. The calculator always rounds bags up to the next whole bag after adding your extra allowance.
How is concrete for steps calculated?
Each step is treated as a solid block as tall as all the steps below it plus its own rise. For n steps the total is width × rise × run × n(n+1)/2. Three 4 ft wide steps with a 7 in rise and 11 in run need about 12.8 cubic feet before extra.
Sources
Bag yields come from manufacturers' own data sheets. The 80, 60 and 40 lb yields match across two manufacturers. Metric bags are calculated at the same yield per kilogram as the US bags. That gives about 9.4 L for 20 kg, 11.7 L for 25 kg and 14 L for 30 kg, which falls within the figures published for those bag sizes below. Yields vary by brand and product, so the one printed on your bag always wins.
- QUIKRETE, Concrete Mix (No. 1101) data sheet. Yields: 40 lb ≈ 0.30 ft³ (8.5 L), 50 lb ≈ 0.375 ft³ (10.6 L), 60 lb ≈ 0.45 ft³ (12.7 L), 80 lb ≈ 0.60 ft³ (17 L).
- SAKRETE, High Strength Concrete Mix data sheet (rev. 7-10). Yields: 40 lb .30 cu ft, 60 lb .45 cu ft, 80 lb .60 cu ft.
- SAKRETE, 5000 Plus Concrete Mix data sheet. Yield: 50 lb (22.7 kg) bag 0.38 ft³ (0.011 m³).
- National Ready Mixed Concrete Association (NRMCA), Concrete in Practice CIP 8: Discrepancies in Yield (2016). Order more than the original volume estimate by at least 4 to 10 percent to cover waste, extra thickness and form deflection.
- NIST, Guide to the SI (SP 811), Appendix B.8: Factors for Units Listed Alphabetically. 1 ft = 0.3048 m and 1 in = 0.0254 m exactly; 1 yd³ = 0.764 554 9 m³.
- SAKRETE Canada (King Packaged Materials), Concrete Mix product data sheet. Yield: 30 kg (66 lb) bag ≈ 0.014 m³ (1/2 ft³).
- Easy Mix (River Sands), Super Strength Concrete technical data sheet. Each 20 kg bag contains approximately 10 litres of concrete; test results list a volume yield of about 9 litres.
- Cement Australia, Concrete Mix 20 kg sell-in sheet. Two 20 kg bags cover a 450 × 500 mm slab about 75 mm thick, which works out to about 8.4 litres per bag.
- Firth (Dricon), CivilCrete technical data sheet. Yield per 25 kg bag: 0.010 m³ (approximate).
- CMI, G25 Concrete Mix data sheet. A 25 kg bag produces approximately 0.012 m³ of finished concrete.
Sources checked 21 November 2026.