Skip to content
Just Enough Build

Fence Post Concrete Calculator

Enter your hole size, gravel depth and post size to see how many bags of concrete each fence post needs, and how many to buy for the whole fence.

Formula and worked example below

1. Measurements
in

Measure across the top of the hole

in
in

Enter 0 if there is no gravel layer

in

A 4×4 is 3.5 in; a 6×6 is 5.5 in

%

The concrete industry (NRMCA) advises ordering at least 4–10% extra. Running short mid-pour is worse than a few spare bags.

3. Bag size

Post hole sheet

10 posts, 10 in × 36 in holes

Bags per post

2.1× 80 lb

per post, including 10% extra

Concrete depth in hole
30 in
Hole volume (above gravel)
1.36 ft³
Post takes up
− 0.21 ft³
Concrete per post
1.15 ft³
10 posts + 10% extra
12.7 ft³

22× 80 lb bags in total

or 29 × 60 lb · 34 × 50 lb · 43 × 40 lb

Each 80 lb bag makes about 0.60 ft³ of concrete.

Not to scale. 10 posts, 10 in × 36 in holes

Shopping list

  • 2280 lb bags of concrete mix0.60 ft³ per bag
  • 2.7 ft³Gravel for the base of the holes6 in in each hole

How it's calculated

A post hole is a cylinder. The concrete fills it from the top of the gravel to the top of the hole, around the post. So the calculator takes the volume of that cylinder and subtracts the part of the post inside it.

Concrete depth   = Hole depth − Gravel depth
Hole area        = π × (Hole diameter ÷ 2)²
Post area        = Width²  (square post)  or  π × (Width ÷ 2)²  (round post)
Per post         = (Hole area − Post area) × Concrete depth
Total to order   = Per post × Posts × (1 + Extra % ÷ 100)
Bags             = Total ÷ bag yield, rounded up

Nominal lumber sizes are larger than the real post: a 4×4 measures 3.5 in and a 6×6 measures 5.5 in. Enter the size you measure.

Worked example

Imperial

10 posts, 4×4, 10 in × 36 in holes, 6 in gravel

Hole area
π × 5² = 78.5 in²
Minus post
78.5 − 3.5² = 66.3 in²
Per post
66.3 × 30 = 1,989 in³ = 1.15 ft³
× 10, +10%
12.66 ft³
80 lb bags
12.66 ÷ 0.60 → 22

Metric

10 posts, 100 mm square, 250 × 900 mm holes, 150 mm gravel

Hole area
π × 0.125² = 0.0491 m²
Minus post
0.0491 − 0.01 = 0.0391 m²
Per post
0.0391 × 0.75 = 29.3 L
× 10, +10%
322 L
25 kg bags (typical)
322 ÷ 11.7 → 28

Tips

Measure a dug hole, not the auger size.

Holes are often wider at the top than the auger or post-hole digger, especially in loose soil. Measure one or two finished holes and use those numbers.

Buy a few spare bags. Posts at corners and gates often get bigger holes. An extra bag or two costs little compared with a second trip.

Different mix, different yield. Fast-setting post mixes are often sold in smaller bags with a different yield. Check the bag and pick the closest size here, or use the yield to divide the total volume yourself.

Questions

How much concrete do I need per fence post?

It depends on the hole, not the fence. A 10 in wide, 36 in deep hole with 6 in of gravel at the bottom and a 4×4 post holds about 1.15 cubic feet of concrete. That is just under two 80 lb bags, or a little over two once you add 10% extra.

Why does the post size matter?

The post sits in the hole and takes up space that would otherwise be concrete. A 4×4 post is actually 3.5 in square, so in a 10 in hole it takes up about 16% of the volume. Leaving it out would make you buy more bags than you need.

Does the gravel at the bottom count?

No. Gravel under the post lets water drain away and is not part of the concrete. The calculator subtracts the gravel depth from the hole depth before working out the concrete, and lists the gravel separately in the shopping list.

How many bags for 10 fence posts?

With 10 in × 36 in holes, 6 in of gravel and 4×4 posts, 10 posts need about 11.5 cubic feet of concrete, or 12.7 with 10% extra. That is 22 × 80 lb bags or 29 × 60 lb bags. Change the inputs above to match your holes.

Sources

Bag yields come from manufacturers' own data sheets. The 80, 60 and 40 lb yields match across two manufacturers. Metric bags are calculated at the same yield per kilogram as the US bags. That gives about 9.4 L for 20 kg, 11.7 L for 25 kg and 14 L for 30 kg, which falls within the figures published for those bag sizes below. Yields vary by brand and product, so the one printed on your bag always wins.

  1. QUIKRETE, Concrete Mix (No. 1101) data sheet. Yields: 40 lb ≈ 0.30 ft³ (8.5 L), 50 lb ≈ 0.375 ft³ (10.6 L), 60 lb ≈ 0.45 ft³ (12.7 L), 80 lb ≈ 0.60 ft³ (17 L).
  2. SAKRETE, High Strength Concrete Mix data sheet (rev. 7-10). Yields: 40 lb .30 cu ft, 60 lb .45 cu ft, 80 lb .60 cu ft.
  3. SAKRETE, 5000 Plus Concrete Mix data sheet. Yield: 50 lb (22.7 kg) bag 0.38 ft³ (0.011 m³).
  4. National Ready Mixed Concrete Association (NRMCA), Concrete in Practice CIP 8: Discrepancies in Yield (2016). Order more than the original volume estimate by at least 4 to 10 percent to cover waste, extra thickness and form deflection.
  5. NIST, Guide to the SI (SP 811), Appendix B.8: Factors for Units Listed Alphabetically. 1 ft = 0.3048 m and 1 in = 0.0254 m exactly; 1 yd³ = 0.764 554 9 m³.
  6. NIST, Voluntary Product Standard PS 20-25, American Softwood Lumber Standard (January 2025), Table 3. Nominal 4 in dimension lumber dresses to 3-1/2 in (dry); 5 and 6 in timbers are 1/2 in under nominal, so a 6×6 is 5-1/2 in.
  7. Engineering ToolBox, Softwood Lumber: Dimensions. Nominal 4 × 4 actual size 3 1/2 × 3 1/2 in (89 × 89 mm).
  8. SAKRETE Canada (King Packaged Materials), Concrete Mix product data sheet. Yield: 30 kg (66 lb) bag ≈ 0.014 m³ (1/2 ft³).
  9. Easy Mix (River Sands), Super Strength Concrete technical data sheet. Each 20 kg bag contains approximately 10 litres of concrete; test results list a volume yield of about 9 litres.
  10. Cement Australia, Concrete Mix 20 kg sell-in sheet. Two 20 kg bags cover a 450 × 500 mm slab about 75 mm thick, which works out to about 8.4 litres per bag.
  11. Firth (Dricon), CivilCrete technical data sheet. Yield per 25 kg bag: 0.010 m³ (approximate).
  12. CMI, G25 Concrete Mix data sheet. A 25 kg bag produces approximately 0.012 m³ of finished concrete.

Sources checked 21 November 2026.